Normally, Windows 10 starts for a long time. On a traditional hard drive, it can take more than a minute to display the desktop. And even after that, it still loads some services in the background, which means it’s still pretty slow until everything is formatted correctly. For this reason, Windows 8 (which also started slowly) introduced a fast boot.

What is a quick start?

A lot happens when your computer starts up. Basically, the kernel is loaded with certain drivers. Programs, libraries, and other data are then read from disk and executed or otherwise processed. With a good SSD, it’s pretty fast. The desktop will appear after about 10 to 20 seconds. Since this time is acceptable, most users are unaware that it can be even faster. When Quick Start is on, the computer starts in less than five seconds. But even though this feature is enabled by default, on some systems, Windows still runs the normal startup process.

You can read more about Quick Launch here. If you want to shorten a long story, you can think of this analogy. Suppose that during normal startup, the computer must add 1 + 2 + 3 + 4 to get a result of 10. With a quick boot, Windows shuts down 10 results on disk. On the next boot, it will copy this result from disk to RAM. This avoids recalculating the number from zero.

How do I know if Windows starts quickly?

It’s actually pretty easy. If you see a starting animation where these dots turn in a circle, it is a normal start. If you don’t see this startup animation, Windows will start a quick startup.

See also  What is Microsoft Defender Application Guard and how to activate it

Here is an example of a normal boot.

And this is an example of a quick start.

Even if everything is fine, your operating system will not perform a quick boot every time. Here are some examples:

  • When you restart your computer, the next time you turn it on, it will restart regularly. In other words, a quick boot can only occur after the computer is turned off.
  • After the upgrade.
  • After installing or removing the driver.
  • In some cases, if you start Windows and shut it down quickly, let the operating system “cool down” and load background information for at least a minute or two before shutting it down during testing. The steps in this article.

Related: Chrono vs Moco: Which Free Fire character is best in Clash Squad mode?

How do I make sure my system uses the Quick Start Guide?

Conditions vary from system to system. In some cases, you may find that even without all of these, Windows starts quickly. In most cases, however, the following requirements apply.

1. Windows must be started via UEFI. If you have installed the operating system in BIOS mode, you may be able to convert to UEFI as follows. Also, be sure to change your UEFI settings to disable the BIOS boot and enable the UEFI boot later.

2. You need the motherboard manufacturer’s SATA / NVMe driver. Common Windows drivers do not intersect it. For example, if you see something like “Standard SATA AHCI Controller” in Device Manager, it means that you are using generic drivers. And by the way, SSDs tend to be worse in this scenario. For example, successive read speeds reached 100-200 MB / s with these controllers in one system and increased to 550 MB / s with separate controllers.

Start Windows Device Manager in 4 seconds

3. Quick Start should be enabled in Power Options and enabled by default. But it doesn’t hurt to check it out or re-enable it if you’ve already disabled it for some reason.

4. A high-speed storage device such as an SSD or NVMe is required. Quickboot can also work with hard drives, dramatically reducing boot time, but it apparently doesn’t boot in three seconds, as advertised in the tutorial title.

If the quick start is still inactive

The steps above should be enough to speed up your computer. If you failed, try installing other drivers for your motherboard, video card, and other hardware. If you can’t find drivers on the manufacturer’s website, try this tool. In the list provided by this program, you will see the drivers labeled with the manufacturer’s name. If you try a driver for a particular brand but it doesn’t work, try a different driver from a different manufacturer. Although it is a different brand, they often use the same / similar chips and chipsets, so the drivers are the same.

If you installed Windows when you boot from the BIOS, completely disable BIOS booting (and CSM if available), only enable UEFI boot and reinstall the operating system.

Related: Allow applications through Windows Firewall

If these options also do not work, you may have a faulty UEFI implementation or hardware with which Windows cannot use Fast Boot. Unfortunately, if you fall into this category, all you can do is replace the motherboard or problematic hardware.

I hope you are one of the lucky ones!

About the author

admin

Leave a Comment