The slow speed of USB transfers can be a bit frustrating. The worst part about this problem is that USB 3.0 was designed to increase the speed of data transfer, since its speed is 5 Gbit / s.

In this article, we are going to see some solutions to consider to fix too slow transfer speed of USB 3.0 in Windows 10.

usb

Slow transfer speed of USB 3.0 in Windows 10

Here is what you can do to fix slow USB 3.0 transfers:

  • Run the troubleshooter.
  • Manage the USB driver.

Run the troubleshooter

  • The first thing to do to resolve this issue is to run the troubleshooter for hardware and peripherals.
  • To do this, run Windows PowerShell as administrator since start menu, type the command below and press Entrance.
msdt.exe -id DeviceDiagnostic

Follow the on-screen instructions to troubleshoot hardware and peripherals.

Manage the USB driver

If there is any problem with your USB driver, you will be faced with this problem. Therefore, to solve the problem of too slow transfer speed of USB 3.0, it is necessary to fix the USB driver.

There are three things you need to do to fix this problem. Make sure you do these actions in the order listed.

Go back to the previous version of the USB driver : If the problem is due to a faulty driver, the first thing to do is to reset your USB driver. To do this, launch the Device Manager since start menu, develop the branch USB bus controller, right-click USB drivers and select Properties. Go to the tab Pilot and select Restore the driver. If the option is grayed out, your driver may be out of date.

USB driver update : If your driver is outdated, try updating it. To do this, launch the Device Manager from the start menu, develop the branch USB bus controller, right-click USB drivers and select Properties. Go to the tab Pilot and select Update the driver. Follow the on-screen instructions to update the USB driver and remedy the slow transfer.

Reinstall the USB driver : If none of the above solutions worked for you, try reinstalling the USB driver. To do this, launch the Device Manager from the start menu, develop the branch USB bus controller, right-click USB drivers and select Uninstall the device. After uninstalling the USB driver, right-click on USB bus controller and select Check for hardware changes.

Restart your computer and see if these manipulations fixed the issue of the transfer speed being too slow.

About the author

admin

Leave a Comment